;

SINUMERIK 828D BASIC M производства Siemens

SINUMERIK 828D BASIC M

The SINUMERIK 828D BASIC M is an operator-panel-based CNC, tailored for use in modern standard milling machines.

SINUMERIK 828D BASIC M PPU 241.2, horizontal

SINUMERIK 828D BASIC M PPU 240.2, vertical

  • Compact, rugged, and maintenance-free operator-panel CNC
  • User-friendly input of program and parameters using QWERTY keyboard
  • Highest machining precision with 80 bit NANOFP accuracy
  • The new user interface SINUMERIK Operate
  • Intelligent kinematic transformations for the machining of cylindrical workpieces
  • Technology package SINUMERIK MDynamics with the new function Advanced Surface: Perfect workpiece surfaces and very fast machining times in the production of moldmaking workpieces
  • ShopMill: Very fast programming time in the production of individual parts and small batches
  • programGUIDE: Very fast machining times and maximum flexibility in the manufacture of workpieces in large batch sizes
  • Unique spectrum of technology cycles - ranging from the machining of any milling contours with residual material detection to in-process measurements
  • Animated Elements: Unique operating and programming support with moving picture sequences
  • State-of-the-art data transmission via USB stick, CompactFlash card and plant network (Ethernet)
  • Easy Message: Maximum machine availability thanks to process monitoring based on text messaging (SMS)
 

SINUMERIK 828D BASIC M
PPU 240.2 vertical

SINUMERIK 828D BASIC M
PPU 241.2 horizontal

 

6FC5370-4AM20-0AA0

6FC5370-3AM20-0AA0

Input voltage

24 V DC, + 20 %/- 15 %

24 V DC, + 20 %/- 15 %

Power consumption, max.

60 W

60 W

Mains buffering time

3 ms (20 ms with SITOP smart)

3 ms (20 ms with SITOP smart)

Degree of protection according to EN 60529 (IEC 60529)

 

 

  • Operator panel front

IP65 (with closed front cover)

IP65 (with closed front cover)

  • PPU

IP20 (rear)

IP20 (rear)

Relative humidity

 

 

  • Storage

5 … 95 % at 25 °C (77 °F)

5 … 95 % at 25 °C (77 °F)

  • Transport

5 … 95 % at 25 °C (77 °F)

5 … 95 % at 25 °C (77 °F)

  • Operation

5 … 90 % at 25 °C (77 °F) (no condensation)

5 … 90 % at 25 °C (77 °F) (no condensation)

Ambient temperature

 

 

  • Storage

-20 … +55 °C (-4 ... 131 °F)

-20 … +55 °C (-4 ... 131 °F)

  • Transport

-20 … +70 °C (-4 ... 158 °F)

-20 … +70 °C (-4 ... 158 °F)

  • Operation

0 ... 45 °C (32 ... 113 °F)
(rear 0 ... 55 °C (32 ...131 °F))

0 ... 45 °C (32 ... 113 °F)
(rear 0 ... 55 °C (32 ...131 °F))

Dimensions

 

 

  • Width

483 mm (19.02 in)

310 mm (12.20 in)

  • Height

220 mm (8.66 in)

380 mm (14.96 in)

  • Depth

105 mm (4.13 in)

105 mm (4.13 in)

Weight, approx.

4.5 kg (9.92 lb)

4.5 kg (9.92 lb)


  • Operator-panel CNC with dedicated system software for milling technologies
  • 2 operator panel variants for horizontal and vertical operator panel housings
  • Integrated QWERTY full CNC keyboard with short-stroke keys
  • USB, CF card and Ethernet interface on the operator panel front
  • Additional Ethernet interface on rear of CNC for connection to factory network
  • Optional GSM/GPRS modem connection: Easy Message
  • CNC options subject to license
  • Up to 5 axes/spindles
  • 1 machining channel/mode group
  • Integrated tool management with tool life monitoring
  • Optional management of replacement tools
  • Graphical machining step programming ShopMill available as an option
  • User interface SINUMERIK Operate which can be integrated in SINUMERIK 840D sl
  • Integrated PLC based on the SIMATIC S7-200 command set with ladder logic programming
  • I/O interface based on PROFINET for the connection of PLC I/O devices and a machine control panel
  • Configurable user screens Easy Screen
  • Integrated data archiving procedure for simple data updates
  • Faults will be remedied for a period of 24 months following 2nd commissioning on all system components in accordance with the repair service contract performance description.

SINUMERIK 828D BASIC M has restricted functionality in accordance with the export list restrictions and therefore does not require official approval as a result of its type in accordance with EU or German law.

The following components can be connected to the SINUMERIK 828D BASIC M:

  • Up to 2 electronic handwheels
  • One mini handheld unit with handwheel
  • Up to 3 I/O modules PP 72/48D PN or PP 72/48D 2/2A PN
  • One MCP 310C PN or MCP 483C PN machine control panel
  • A GSM/GPRS modem
  • SINAMICS S120 Combi drive system via DRIVE-CLiQ

CNC options for SINUMERIK 828D BASIC M PPU 240.2/PPU 241.2

Designation

Order No.

Manufacturer options

 

Axis/spindle, each additional

6FC5800‑0AC20‑0YB0

Positioning axis/auxiliary spindle, each additional

6FC5800‑0AC30‑0YB0

TRANSMIT/Peripheral surface transformation

6FC5800‑0AM27‑0YB0

Pair of synchronized axes (gantry axes), basic

6FC5800‑0AS51‑0YB0

Travel to fixed stop with Force Control

6FC5800‑0AM01‑0YB0

Sag compensation, multi-dimensional (bidirectional compensation)

6FC5800‑0AM55‑0YB0

Evaluation of internal drive variables

6FC5800‑0AS53‑0YB0

SINUMERIK Operate runtime license OA Easy Screen

6FC5800‑0AP64‑0YB0

Drive Based Safety Integrated Extended Functions

6SL5800‑0AC50‑0AA0

User options

 

Advanced Technology
(expansion of the technology cycles for turning and milling)1)

6FC5800-0AP58-0YB0

Extended operator functions2)

6FC5800‑0AP16‑0YB0

ShopTurn/ShopMill sequence programming

6FC5800‑0AP17‑0YB0

Residual material detection and machining for contour pockets and cutting

6FC5800‑0AP13‑0YB0

3D simulation of the finished part

6FC5800‑0AP25‑0YB0

Simultaneous recording (real-time simulation of current machining)

6FC5800‑0AP22‑0YB0

Measuring cycles for drilling/milling and turning

6FC5800‑0AP28‑0YB0

Network drive management

6FC5800‑0AP01‑0YB0

Replacement tools for tool management

6FC5800‑0AM78‑0YB0

RCS Host remote diagnostics function

6FC5800-0AP30-0YB0

Contour handwheel

6FC5800‑0AM08‑0YB0

Advanced Surface

Basic scope

Spline interpolation (A, B and C splines)

6FC5800‑0AS16‑0YB0


1) The CNC option extended technology functions provides you with the following technology cycles for the additional machining operations listed below:

  • Drill and thread milling
  • Thread milling
  • Multi-edge milling
  • Engraving
  • Milling of contour pockets and spigots (with up to 12 islands)

2) The operator functions in the basic scope of the SINUMERIK 828D BASIC M are dimensioned for standard applications. With the CNC option extended operator functions, the following additional operator functions can be enabled:

  • Overstoring
  • Teach-in
  • DRF offset
  • Extended block search
  • Save workpiece setup data
  • Additional measuring versions beyond standard scope
    • Setting the workpiece zero in standard scope: set edge, align edge, right-angled corner, 1 hole and 1 circular spigot
    • Expansion of measurement windows via combination field
  • Display of active synchronous actions in HMI
  • Number of levels for skip blocks 10
  • Load/save MDA program
Код Заказной номер Описание Вес (кг) Заказать
63489 6FC5248-0AF14-0AA0 sinumerik набор зажимов (9 шт. ) для компонентов управления с 2,5 mm алюминиевым профилем, длина 20 mm 0.1 Заказать
64238 6FC5313-5AG00-0AA1 sinumerik compactflash card 1gb empty 0.02 Заказать
64254 6FC5370-3AM20-0AA0 sinumerik 828d basic m ppu 241.2 horizontal without cnc-software 4.5 Заказать
112245 6FC5370-4AM20-0AA0 sinumerik 828d basic m ppu 240.2 vertikal without cnc-software 4.5 Заказать
112831 6FC5800-0AC20-0YB0 sinumerik 828d additional 1 axis/spindle software option delivery of a license on paper 0.01 Заказать
112832 6FC5800-0AC30-0YB0 sinumerik 828d additional 1positioning axis/auxiliary spindle software option delivery of a license on paper 0.1 Заказать
64813 6FC5800-0AM01-0YB0 sinumerik 840di sl/840d sl наезд на жесткий упор (с force control) опция по поставка одной лицензии 0.01 Заказать
64818 6FC5800-0AM08-0YB0 sinumerik 840di sl/840d sl контурный маховичок опция по поставка одной лицензии 0.01 Заказать
112843 6FC5800-0AM27-0YB0 sinumerik 840di sl/840d sl transmit и трансформация боковой поверхности опция по поставка одной лицензии 0.01 Заказать
64839 6FC5800-0AM55-0YB0 sinumerik 840di sl/840d sl компенсация провисания, многомерная опция по поставка одной лицензии 0.01 Заказать
112866 6FC5800-0AP01-0YB0 sinumerik 840di sl/840d sl управление сетевыми дисками опция по поставка одной лицензии 0.01 Заказать
64863 6FC5800-0AP13-0YB0 sinumerik 840di sl/840d sl распознавание и обработка остаточн. материала для контурн. осей и обработка резаньем опция по поставка одной лицензии 0.01 Заказать
64865 6FC5800-0AP17-0YB0 sinumerik 840di sl/840d sl shopturn/shopmill опция по поставка одной лицензии 0.01 Заказать
64866 6FC5800-0AP22-0YB0 sinumerik 840di sl/840d sl прорисовка (симуляция атуальной обработки в режиме реального времени) опция по поставка одной лицензии 0.01 Заказать
64869 6FC5800-0AP25-0YB0 sinumerik 840di sl/840d sl 3d-симуляция 1 (готовая деталь) опция по поставка одной лицензии 0.01 Заказать
112873 6FC5800-0AP28-0YB0 sinumerik 840di sl/840d sl измерительные циклы опция по поставка одной лицензии 0.01 Заказать
112874 6FC5800-0AP30-0YB0 sinumerik 840di sl/840d sl mc information system (mcis) rcs host опция по поставка одной лицензии 0.01 Заказать
64877 6FC5800-0AP58-0YB0 sinumerik 828d advanced technology functions software option delivery of a license on paper 0.01 Заказать
112889 6FC5800-0AP64-0YB0 sinumerik 840d sl sinumerik opera runtimelizenz oa easy screen опция по поставка одной лицензии 0.01 Заказать
64879 6FC5800-0AS16-0YB0 sinumerik 840di sl/840d sl сплайн-интерполяция опция программного обеспечения - поставка одной лицензии 0.01 Заказать
64881 6FC5800-0AS51-0YB0 sinumerik 828d synchronous axes pair (gantry) basic software option delivery of a license on paper 0.01 Заказать
112898 6FC5800-0AS53-0YB0 sinumerik 828d analysis of internal drives basic software option delivery of a license on paper 0.01 Заказать
112917 6FC5830-0CY40-0YA8 sinumerik 828d ppu240/241/260/261/280/281 export software 4.3 hf1 on dvd without license 0.03 Заказать
112918 6FC5835-2GY40-0YA0 sinumerik 828d, ppu240/241 cnc-software milling; export software 4.3 hf1 on cf-card with license 0.03 Заказать
64983 6FC5860-0YC20-1YA8 sinumerik 828d/840d sl sinumerik operate (hmi sl) языковое расширение для 840d sl: cnc-sw 2.4 sp1 2.5 sp1 2.6 for 828d: cnc-sw 2.6 pcu 50: sin-operate sw 2.6 pcu 321: hmi-sl 2.4 sp1 dvd - выпуск 05/10, без лицензией 0.06 Заказать
64991 6FC5860-7YC00-0YA0 sinumerik rcs commander, для pc/pg, актуальное по на on cd-rom с лицензия 0.03 Заказать
67585 6SL3070-0AA00-0AG0 sinamics micromaster sizer утилита для проектирования dvd для windows 2000 sp4 и windows xp professional sp3 и windows xp home sp3 версия v3.01 0.1 Заказать
67586 6SL3072-0AA00-0AG0 starter утилита для ввода в эксплуатацию для sinamics и micromaster версия v4.1 sp2 dvd для windows 2000 sp3,sp4 и windows 2003 server sp1 и windows xp prof sp1, sp2, sp3 немецкий английский испанский французский и итальянский 0.03 Заказать
;