SIKUS 1600 is a low-voltage power distribution board in side-by-side cabinet design for indoor applications, optionally for wall or free-standing installation. The SIKUS 1600 already complies with the requirements of standard IEC 61439-1/2. The design has been tested and certified.
SIKUS 1600 is based on the modular building block principle. Thanks to the use of requirements-based, standardized and series-produced assembly kits and the numerous combination possibilities, all demands in connection with low-voltage power distribution can be optimally met.
Through expansion with 8GK distribution board assembly kits or mounting plates, SIKUS 1600 also offers extensive solutions as a distribution board and in control engineering.
A catalog, manual and the SIMARIS Configuration Basic software are available for reliable and quick configuration.
Switchgear engineers must observe the manufacturer's construction and mounting instructions. The low-voltage switchboard must be configured and tested by the switchgear engineer in accordance with IEC 61439-1/2.
The rack is constructed from height, width and depth profiles. It is the supporting structure for all built-in and surface-mounted components. Use of Sendzimir-galvanized frame profiles and self-tapping screws creates a mechanically highly stable construction with safe grounding of the built-in components.
The enclosure parts enable versions in degrees of protection IP30, IP40 or IP55. The powder-coated enclosure parts are finished in RAL 7035. Panel-high doors come as standard with espagnolette and 3 mm double-bit key or optionally with twist lever catches with or without a lock.
The SIKUS 1600 main busbar system offers a practical grading of rated currents up to 1600 A, coordinated with the rated currents and rated short-circuit currents of standard transformers.
Internal partition form 1 or 2 is possible depending on the requirements.
A service-proven and coordinated range of assembly kits is available for 3WL, 3VL, 3NJ4 switching and protection devices and for modular installation devices. Depth-adjustable modular and panel-high mounting plates round off the assembly kit range.
SIKUS 1600 is a system for the transmission and distribution of electrical energy in low-voltage systems.
The flexible modular system enables the configuration of incoming, outgoing or coupling unit sections with 3WL or 3VL circuit breakers. Through expansion with 8GK distribution board assembly kits or mounting plates, SIKUS 1600 also offers extensive solutions as a distribution board and in control engineering.
Through the use of standardized and series-produced assembly kits, easy and quick assembly and long maintenance intervals, SIKUS 1600 offers solutions for cost-effective configuration and operation.
