SIPLUS CPU 315F-2 DP производства Siemens

For configuring a fail-safe automation system for plants with increased safety requirements
Complies with safety requirements up to SIL 3 according to IEC 61508 and up to Cat. 4 according to EN 954-1
Distributed fail-safe I/O modules can be connected through the integral PROFIBUS DP interface (PROFIsafe)
The fail-safe I/O modules of ET 200M can be also centrally connected
The standard modules for non-safety applications can be operated both centrally and locally

Micro Memory Card required for CPU operation.

Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

	SIPLUS CPU 315F-2 DP
Order number	6AG1 315-6FF04-2AB0
Order number based on	6ES7 315-6FF04-0AB0
Ambient temperature range	-25 ... +60 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies except for the ambient conditions.
Compliant with the standards for electronic equipment used on railway rolling stock (EN 50155, temperature T1, category 1).	No
Ambient conditions
Relative humidity	5 … 100 % Condensation permissible

For further technical documentation on SIPLUS, see:
http://www.siemens.com/siplus-extreme

The CPU 315F-2 DP permits the design of a fail-safe automation system for plants with increased safety requirements, especially for production engineering.

Distributed I/O stations containing fail-safe I/O modules can be connected through the integrated PROFIBUS DP interface. The fail-safe I/O modules of ET 200M can also be centrally implemented safety-related.

Safety-related communication between the F CPU and the fail-safe I/O modules is performed on the basis of the PROFIsafe profile.

The CPU 315F-2 DP features the following:

Microprocessor;
the processor achieves a processing time of approximately 50 ns per binary instruction and 0.45 µs per floating-point operation.
Memory:
384 KB high-speed RAM for safety-relevant and standard program sections; increased memory space requirements must be expected (5 times larger) if safety-relevant program sections are implemented. 128 KB data memory of the 384 KB work memory can be used for standard applications. SIMATIC Micro Memory Cards (max. 8 MB) as load memories for programs additionally permit storage of the project (including symbols and comments) in the CPU.
Flexible expansion capability;
max. 32 modules, (4-tier configuration)
MPI multi-point interface;
the integrated MPI interface can establish as many as 16 connections simultaneously to S7-300/400 or to programming device, PC, OP. Of these connections, one is always reserved for programming devices and another for OPs. The MPI makes it possible to set up a simple network with a maximum of 16 CPUs via "global data communication".
PROFIBUS DP interface:
The CPU 315F-2 DP with PROFIBUS DP master/slave interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is handled in the same manner as central I/O (identical configuration, addressing and programming).
Distributed I/O stations with fail-safe I/O modules can be connected via the integral PROFIBUS DP interface. The fail-safe I/O modules of ET 200M can also be installed in central, safety-related configurations.
The safety-oriented communication between the F-CPU and the fail-safe I/O modules is performed on the basis of the PROFIsafe profile.

Password protection;
a password concept protects the user program from unauthorized access.
Diagnostics buffer;
the last 500 errors and interrupt events are saved in a buffer for diagnostic purposes.
Maintenance-free data back-up;
all standard data is automatically written onto the SIMATIC Micro Memory Card by the CPU if there is a voltage interruption, and is available unchanged following voltage recovery.

Parameterizable properties

The S7 configuration as well as the properties and response of the CPUs can be parameterized using STEP 7:

MPI multi-point interface;
determining station addresses
Restart/cycle time behavior;
stipulation of maximum cycle time and loading as well as self-test functions
Clock memory;
setting of addresses
Protection level;
specifying the access rights to program and data
System diagnostics;
determining handling and scope of the diagnostic alarms
Watchdog interrupts;
setting of periodicity
Clock interrupts;
setting of start date, start time and periodicity
PROFIBUS DP master/slave interface;
user-defined address assignment for distributed I/O

Display and information functions

Status and error indications;
LEDs indicate hardware, programming, time or I/O errors, and operating statuses such as RUN, STOP and start-up.
Test functions;
the PG is used to indicate signal status during program execution, to modify process variables independently of the user program and to output the contents of stack memories.
Information functions;
you can use the PG to obtain information about the storage capacity and operating mode of the CPU , the current utilization of the main and load memories as well as current cycle times and diagnostic buffer contents in plain text.

Integrated communication functions

PG/OP communication
Global data communication
S7 basic communication
S7 communication (server only)
Routing
Data block routing

Communication

The safety-related and standard communication between the central controller and the distributed stations is performed via PROFIBUS DP. The specially developed PROFIBUS profile PROFIsafe allows user data for the safety function to be transferred within the standard data message frame. Additional hardware components, such as special safety buses, are not necessary. The necessary software is either integrated in the hardware components as an expansion of the operating system or it is loaded into the CPU as a certified software block.

System functions

The CPU provides many extensive system functions for diagnostics, parameterization, synchronization, alerting, time measurement, etc.
For further details, see the manual.

Mode of operation

The safety functions of the F-CPU are included in the F program of the CPU and in the fail-safe signal modules.

The signal modules monitor the input and output signals through discrepancy analyses and the application of test signals.

The CPU checks that the controller is operating correctly by means of periodic self-tests, test instructions as well as logical and time-based program execution checks. The I/O is checked with requests for a sign of life.

If an error is diagnosed in the system, it is transferred to a safe state.

An F runtime license is not required for operating the S7-300F-2 DP.

Programming

The S7-300F is programmed in the same manner as the other SIMATIC S7 systems. The user program for non fail-safe system components is created using the familiar programming tools, e.g. STEP 7.

SIMATIC S7 Distributed Safety option package

The STEP 7 option package "SIMATIC S7 Distributed Safety" is required for programming the safety-related program sections. The package contains all the functions and blocks required to create the F program.

The F program with the safety functions is created in F-FBD or F-LAD or using special function blocks from the F library. Use of F-FBD or F-LAD simplifies configuration and programming of the plant and, due to the cross-plant, uniform presentation, also acceptance testing. The programmer can therefore concentrate entirely on configuring the safety-related application, without the need to use any additional tools.

	6ES7 315-6FF04-0AB0
Product version
Hardware product version	01
Firmware version	V3.3
General information
associated programming package	STEP 7 V5.5 + SP1 or higher or STEP7 V5.2 + SP1 or higher with HSP 218 + Distributed Safety
Supply voltage
24 V DC	Yes
Input current
Current consumption (rated value)	850 mA
Current consumption (in no-load operation), typ.	150 mA
Inrush current, typ.	3.5 A
I²t	1 A²·s
Power losses
Power loss, typ.	4.5 W
Memory
Work memory
integrated	384 Kibyte
expandable	No
Size of retentive memory for retentive data blocks	128 Kibyte
Load memory
pluggable (MMC)	Yes
pluggable (MMC), max.	8 Mbyte
Data management on MMC (after last programming), min.	10 a
Backup
present	Yes; Guaranteed by MMC (maintenance-free)
without battery	Yes; Program and data
CPU-blocks
Number of blocks (total)	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
Number, max.	1 024; Number range: 1 to 16000
Size, max.	64 Kibyte
FB
Number, max.	1 024; Number range: 0 to 7999
Size, max.	64 Kibyte
FC
Number, max.	1 024; Number range: 0 to 7999
Size, max.	64 Kibyte
OB
Size, max.	64 Kibyte
Nesting depth
per priority class	16
additional within an error OB	4
CPU processing times
for bit operations, min.	0.05 µs
for word operations, min.	0.09 µs
for fixed point arithmetic, min.	0.12 µs
for floating point arithmetic, min.	0.45 µs
Counters, timers and their retentivity
S7 counter
Number	256
Retentivity
adjustable	Yes
lower limit	0
upper limit	255
preset	Z 0 to Z 7
Counting range
lower limit	0
upper limit	999
IEC counter
present	Yes
Type	SFB
Number	Unlimited (limited only by RAM capacity)
S7 times
Number	256
Retentivity
adjustable	Yes
lower limit	0
upper limit	255
preset	No retentivity
Time range
lower limit	10 ms
upper limit	9 990 s
IEC timer
present	Yes
Type	SFB
Number	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area, total	All, 128 KB max.
Flag
Number, max.	2 048 byte
Retentivity available	Yes; MB 0 to MB 2047
Retentivity preset	MB 0 to MB 15
Number of clock memories	8; 1 memory byte
Data blocks
Retentivity adjustable	Yes; via non-retain property on DB
Retentivity preset	Yes
Local data
per priority class, max.	32 Kibyte; Max. 2 KB per block
Address area
I/O address area
Inputs	2 048 byte
Outputs	2 048 byte
of which, distributed
Inputs	2 048 byte
Outputs	2 048 byte
Process image
Inputs, adjustable	2 048 byte
Outputs, adjustable	2 048 byte
Inputs, default	384 byte
Outputs, default	384 byte
Subprocess images
Number of subprocess images, max.	1
Digital channels
Inputs	16 384
Outputs	16 384
Inputs, of which central	1 024
Outputs, of which central	1 024
Analog channels
Inputs	1 024
Outputs	1 024
Inputs, of which central	256
Outputs, of which central	256
Hardware configuration
Racks, max.	4
Modules per rack, max.	8
Expansion devices, max.	3
Number of DP masters
integrated	1
via CP	4
Number of operable FMs and CPs (recommended)
FM	8
CP, point-to-point	8
CP, LAN	10
Time of day
Clock
Hardware clock (real-time clock)	Yes
battery-backed and synchronizable	Yes
Deviation per day, max.	10 s; Typ.: 2 s
Backup time	6 wk; At 40 °C ambient temperature
Behavior of the clock following POWER-ON	Clock continues running after POWER OFF
Behavior of the clock following expiry of backup period	Clock continues to run with the time at which the power failure occurred
Operating hours counter
Number	1
Number/Number range	0
Range of values	0 to 2^31 hours (when using SFC 101)
Granularity	1 hour
retentive	Yes; Must be restarted at each restart
Clock synchronization
supported	Yes
to MPI, master	Yes
to MPI, slave	Yes
to DP, master	Yes; With DP slave only slave clock
to DP, slave	Yes
in AS, master	Yes
in AS, slave	No
1st interface
Type of interface	Integrated RS 485 interface
Physics	RS 485
Isolated	No
Power supply to interface (15 to 30 V DC), max.	200 mA
Functionality
MPI	Yes
DP master	No
DP slave	No
Point-to-point connection	No
MPI
Services
PG/OP communication	Yes
Routing	Yes
Global data communication	Yes
S7 basic communication	Yes
S7 communication	Yes; Only server, configured on one side
S7 communication, as client	No
S7 communication, as server	Yes
Transmission rate, max.	187.5 kbit/s
2nd interface
Type of interface	Integrated RS 485 interface
Physics	RS 485
Isolated	Yes
Power supply to interface (15 to 30 V DC), max.	200 mA
Functionality
MPI	No
DP master	Yes
DP slave	Yes
Local Operating Network	No
DP master
Services
PG/OP communication	Yes
Global data communication	No
S7 basic communication	Yes; I blocks only
S7 communication	Yes; Only server, configured on one side
S7 communication, as client	No
S7 communication, as server	Yes
Equidistance mode support	Yes
Isochronous mode	Yes; OB 61
SYNC/FREEZE	Yes
Activation/deactivation of DP slaves	Yes
Number of DP slaves that can be simultaneously activated/deactivated, max.	8
DPV1	Yes
Transmission rate, max.	12 Mbit/s
Number of DP slaves, max.	124; Per station
Address area
Inputs, max.	2 048 byte
Outputs, max.	2 048 byte
User data per DP slave
Inputs, max.	244 byte
Outputs, max.	244 byte
DP slave
Services
PG/OP communication	Yes
Global data communication	No
S7 basic communication	No
S7 communication	Yes; Only server, configured on one side
S7 communication, as client	No
S7 communication, as server	Yes
Direct data exchange (slave-to-slave communication)	Yes
DPV1	No
GSD file	The latest GSD file is available at: http://www.siemens.de/profibus-gsd
Transmission rate, max.	12 Mbit/s
Automatic baud rate search	Yes; only with passive interface
Transfer memory
Inputs	244 byte
Outputs	244 byte
Address area, max.	32
User data per address area, max.	32 byte
Communication functions
PG/OP communication	Yes
Data record routing	Yes
Global data communication
supported	Yes
Number of GD loops, max.	8
Number of GD packets, max.	8
Number of GD packets, transmitter, max.	8
Number of GD packets, receiver, max.	8
Size of GD packets, max.	22 byte
Size of GD packet (of which consistent), max.	22 byte
S7 basic communication
supported	Yes
User data per job, max.	76 byte
User data per job (of which consistent), max.	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
supported	Yes
as server	Yes
as client	Yes; Via CP and loadable FB
User data per job, max.	180 byte; With PUT/GET
User data per job (of which consistent), max.	240 byte; as server
S5-compatible communication
supported	Yes; via CP and loadable FC
S7 message functions
Number of login stations for message functions, max.	16; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages	Yes
simultaneously active Alarm-S blocks, max.	300
Test commissioning functions
Status/control
Status/control variable	Yes
Variables	Inputs, outputs, memory bits, DB, times, counters
Number of variables, max.	30
of which status variables, max.	30
of which control variables, max.	14
Forcing
Forcing	Yes
Force, variables	Inputs, outputs
Number of variables, max.	10
Status block	Yes; Up to 2 simultaneously
Single step	Yes
Number of breakpoints	4
Diagnostic buffer
present	Yes
Number of entries, max.	500
adjustable	No
Of which powerfail-proof	100; Only the last 100 entries are retained
Number of entries readable in RUN, max.
adjustable	Yes; From 10 to 499
preset	10
Isochronous mode
Isochronous mode	Yes
Ambient conditions
Operating temperature
Min.	0 °C
max.	60 °C
Configuration
programming
Programming language
LAD	Yes
FBD	Yes
STL	Yes
SCL	Yes
CFC	Yes
GRAPH	Yes
HiGraph®	Yes
Command set	see instruction list
Nesting levels	8
Know-how protection
User program protection/password protection	Yes
Block encryption	Yes; With S7 block Privacy
Dimensions
Width	40 mm
Height	125 mm
Depth	130 mm
Weight
Weight, approx.	290 g

Код	Заказной номер	Описание	Вес (кг)	Заказать
60610	6AG1315-6FF04-2AB0	siplus s7-300, cpu 315f-2dp, расширенный диапазон рабочих температур -25... +60 град. цельсия, с конформным покрытием, на основе 6es7315-6ff04-0ab0. failsafe-cpu с интерфейсом mpi, встроенным источником питания =24 в, 384 кбайт рабочей памяти 2.интерфейс	0.363	Заказать
110756	6ES7391-1AA00-0AA0	simatic s7-300, запасной съемный соединитель для подключения цепей питания =24в к центральным процессорам s7-300 compact и модулю fm352-5, упаковка из 10 штук	0.061	Заказать
110780	6ES7398-8EA00-8AA0	simatic s7-300/-400, руководство по связи s7-300/-400, немецкий язык	0.585	Заказать
110781	6ES7398-8EA00-8BA0	simatic s7-300/-400, руководство по связи s7-300/-400, английский язык	0.568	Заказать
110782	6ES7398-8FA10-8AA0	simatic s7-300 compact, руководство по конфигурированию, технические характеристики центральных процессоров, технические характеристики модулей, список инструкций, немецкий язык	5	Заказать
110783	6ES7398-8FA10-8BA0	simatic s7-300 compact, руководство по конфигурированию, технические характеристики центральных процессоров, технические характеристики модулей, список инструкций, английский язык	5	Заказать
63144	6ES7833-1FC02-0YA5	simatic s7, f средство разработки распределенных систем повышенной безопасности distributed safety v5.4, плавающая лицензия для 1 пользователя, инженерное прогр. обеспечение, прогр. обесп. и документация на cd, class a, 3 языка (нем., англ.,франц.), работа под step7 v5.3 sp3	0.257	Заказать
63145	6ES7833-1FC02-0YE5	simatic s7, f средство программирования distributed safety v5.4, пакет обновления от версии 5.x до версии 5.4, плавающая лицензия для 1 пользователя, инженерное прогр. обеспечение, прогр. обесп. и документация на cd, class a, 3 языка (нем., англ.,франц.), работа под step7 v5.3 sp3	0.257	Заказать
63182	6ES7901-0BF00-0AA0	simatic s7, mpi-кабель для подключения simatic s7 к программатору через mpi, длина 5m	0.274	Заказать
111168	6ES7912-0AA00-0AA0	simatic s7, пластиковые метки маркироки номеров модулей в монтажных стойках s7-300/ s7-400/ et 200m/ c7	0.006	Заказать
111241	6ES7953-8LF20-0AA0	simatic s7, микрокарта памяти mmc для s7-300/c7/et 200, 3.3 в nflash, 64 кбайт	0.012	Заказать
111242	6ES7953-8LG20-0AA0	simatic s7, микрокарта памяти mmc для s7-300/c7/et 200, 3.3 в nflash, 128 кбайт	0.014	Заказать
111243	6ES7953-8LJ30-0AA0	simatic s7, micro memory card f. s7-300/c7/et 200, 3.3 v nflash, 512 kbytes	0.012	Заказать
111244	6ES7953-8LL20-0AA0	simatic s7, микрокарта памяти mmc для s7-300/c7/et 200, 3.3 в nflash, 2 мбайт	0.012	Заказать
111245	6ES7953-8LM20-0AA0	simatic s7, микрокарта памяти mmc для s7-300/c7/et 200, 3.3 в nflash, 4 мбайт	0.012	Заказать
111246	6ES7953-8LP20-0AA0	simatic s7, микрокарта памяти mmc для s7-300/c7/et 200, 3.3 в nflash, 8 мбайт	0.013	Заказать
111255	6ES7972-0AA02-0XA0	simatic dp, rs485-повторитель для подключения шинной системы profibus/mpi bus systems с макс. 31 узлом; макс. 12 мбит/с, степень защиты ip20, улучшенные пользовательские свойства	0.289	Заказать
63269	6ES7972-0BA12-0XA0	simatic dp, соединитель для подключения к profibus, до 12 мбит/с, отвод кабеля под углом 90 градусов, 15.8 x 54 x 34 mm, с встроенным терминальным резистором, с функциями разделения, без гнезда для подключения программатора	0.049	Заказать
111257	6ES7972-0BA52-0XA0	simatic dp, шинный оединитель для подключения к сетям profibus до 12 мбит/с, отвод кабеля под углом 90 градусов, 15,8 x 59 x 35,6 mm (шxвxг), ipcd, технология fast connect, без разъёма для подключения программатора	0.044	Заказать
111258	6ES7972-0BA52-0XB0	simatic dp,bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15,8 x 59 x 35,6 mm (wxhxd), ipcd techology fast connect, without pg socket 100 pieces per packaging unit	4.5	Заказать
111260	6ES7972-0BB12-0XA0	simatic dp, соединитель для подключения к profibus, до 12 мбит/с, отвод кабеля под углом 90 градусов, 15.8 x 54 x 34 mm, с встроенным терминальным резистором, с функциями разделения, с гнездом для подключения программатора	0.056	Заказать
63271	6ES7972-0BB52-0XA0	simatic dp, шинный оединитель для подключения к сетям profibus до 12 мбит/с, отвод кабеля под углом 90 градусов, 15,8 x 59 x 35,6 mm (шxвxг), ipcd, технология fast connect, с разъёмом для подключения программатора	0.049	Заказать
111262	6ES7972-0BB52-0XB0	simatic dp,bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15,8 x 59 x 35,6 mm (wxhxd), ipcd techology fast connect, with pg socket 100 pieces per packaging unit	5	Заказать
63274	6ES7972-0CB20-0XA0	simatic s7, pc usb адаптер для подкл. simatic s7-200/s7-300/ s7-400/ c7 к компьютеру/ программатору через usb интерфейс: pc usb адаптер, cd с набором драйверов и док., usb кабель длиной 5 м, mpi кабель длиной 0.3 м. работа под упр. win 2000/xp	0.526	Заказать
63287	6ES7998-8XC01-8YE0	коллекция руководств simatic на cd-rom. pdf-формат, анг/ нем/ фр/ исп/ ит. язык. все руководства по s7-200/ -300/ -400/ -c7/ -logo!; simatic dp/ -pc/ -pg; step7, инстр. средствам проектирования, прогр. обеспечению runtime, simatic pcs7/ hmi/ net	0.2	Заказать
63288	6ES7998-8XC01-8YE2	коллекция руководств simatic на cd-rom, 5-языковая поддержка (без русского), служба обновления в течение 1 года	0.4	Заказать
114346	6GK1500-0EA02	simatic net, pb шинный соединитель с осевым отводом кабеля для пром. пк, simatic op, olm; скорость передачи 12 мбит/с, оконечный резистор с функциями разделения	0.104	Заказать
116945	6XV1830-0EH10	simatic net, стандартный экранированный profibus кабель для быстрого монтажа (fc), 2-жильный, поставка по метражу отрезками длиной 20 ... 1000 m	0.081	Заказать