Single Motor Modules производства Siemens

The Single Motor Modules in booksize compact format feature the following connections and interfaces as standard:

• 2 DC link connections via integrated DC link busbars
• 1 electronics power supply connection via integrated 24 V DC busbars
• 3 DRIVE‑CLiQ sockets
• 1 motor connection via connector
• 1 safe standstill input (enable pulses)
• 1 safe motor brake controller
• 1 temperature sensor input (KTY84‑130 or PTC)
• 2 PE/protective conductor connections

The status of the Motor Modules is indicated via two multi-color LEDs.

The shield of the motor cable is connected via the motor connector.

The signal cable shield can be connected to the Motor Module by means of a shield connection terminal, e.g. type KLBÜ 3-8 SC from Weidmüller.

The scope of supply of the Motor Modules includes:

• DRIVE‑CLiQ cable (length depends on module width) to connect Motor Module to adjacent Motor Module,
  length 0.11 m for 50 mm wide Motor Modules or
  length 0.16 m for 75 mm wide Motor Modules.
• 2 blanking plugs for sealing unused DRIVE‑CLiQ sockets
• Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
• Connector X21
• Connector X11 for motor brake connection
• Connector X1 for motor connection
• 1 set of warning signs in foreign languages
• 1 heat conducting foil